I recently recommended to a customer to turn their air pressure down on their system as low as their process would allow. Meaning regulate the pressure so you have enough to complete the operations needed but find that happy medium where your compressor isn’t working as hard to build those high pressures for no reason!
Compressed air is an amazing tool to have, and when used properly it can be more efficient that other non compressed air tools that run off electricity. How ever its pretty common to see compressed air systems running at their max just because.
Lowering the air system pressure reduces the compressor power consumption by about 1% for every two psi of lower pressure. Lowering the pressure also makes any unregulated operations reduce consumption by almost 1% for every one psi of pressure reduction. Not to mention the extra savings if your compressor system can turn down the compressor power because of the reduced flow and possibly shut off compressors that are no longer needed!
The best pressure at which to set your system is the level where your production can operate efficiently and effectively without waste: There is no right pressure—it depends on your operations and tools. You may have 90 to 100 psig at the compressor, but at the production machine, where the actual work is being done, you could have only 65 to 70 psig. In some cases, it may be even lower due to pressure drops in undersized piping, filters, regulators. The goal is to lower compressor discharge pressure without affecting the the operations at the end of the line.
Having artificially high plant-pressure can help you deal with surges in compressed air demand that might occasionally cause low-pressure and affect production. The higher pressure acts to store reserve air in the various volumes made up of receivers, pipes and such in your system. However, the higher pressure costs more to produce and makes unregulated end uses consume more air, which is an expensive trade-off. Another option is to make sure you have line pressure regulators at each point of use. This will allow you to regulate the operation to the pressure needed being sure to save compressed air and keep the over all system running more efficient.
You can regulate those point of use lines with a number of EXAIRs Pressure Regulators!
If we can help size a regulator, or have any other questions on how EXAIR can help you save compressed air in your system please reach out to me or one of our other Application Engineers!
Jordan Shouse
Application Engineer
Send me an Email
Find us on the Web
Like us on Facebook
Twitter: @EXAIR_JS
